2011

Height Sets the height of the mesh box along the Z axis.
2Point (height) Sets the height based on the distance between two points:
■ First point. Sets the first point of a two-point distance.
■ Second point. Sets the second point of a two-point distance.
Cone
Creates a 3D mesh with a circular or elliptical base that tapers symmetrically
to a point or to a planar face.
Specify the diameter and height.
Center point of base Sets the center point of the base of the mesh cone.
■ Base radius
■ Diameter
3P (three points) Sets the location, size, and plane of the mesh cone by
specifying three points:
■ First point. Sets the first point on the circumference of the mesh cone base.
■ Second point. Sets a second point on the circumference of the mesh cone
base.
■ Third point. Sets the size and planar rotation of the mesh cone base.
■
Height
614 | Chapter 13 M Commands