2011

True Color Specifies a true color to be used for the selected object. Enter three
integer values from 0 to 255 separated by commas to specify a true color.
Color Book Specifies a color from a loaded color book to used for the selected
object. Enter the name of a color book that has been installed, such as
PANTONE
®
.
The color is assigned to the layer or layers, and the layers are turned on. To
assign a color but turn off the layer, precede the color with a minus sign (-).
Ltype
Changes the linetype associated with a layer.
Lweight
Changes the lineweight associated with a layer.
If you enter a valid lineweight, the current lineweight is set to the new value.
If you enter a lineweight that is not valid, the current lineweight is set to the
nearest fixed lineweight value. If you would like to plot an object with a
custom width not found in the list of fixed lineweight values, you can use the
Plot Style Table Editor to customize plotted lineweights.
Transparency
Changes the transparency level associated with a layer. Enter a value from 0
to 90.
After specifying a transparency value, the following prompt is displayed:
Enter name list of layer(s) for transparency specified value% <0>: Enter the names
of the layers to which to apply this transparency level, or press Enter to apply it to the
current layer only
Material
Attaches a material to a layer. The material must be available in the drawing
before it can be assigned to a layer.
Plot
Controls whether visible layers are plotted. If a layer is set to plot but is
currently frozen or turned off, the layer is not plotted.
Pstyle
Sets the plot style assigned to a layer. This option is not available if you are
using color-dependent plot styles in the current drawing (the PSTYLEPOLICY
system variable is set to 1). See “Use Plot Styles to Control Plotted Objects” in
the User's Guide.
If you select a plot style other than NORMAL, the following prompt is
displayed:
546 | Chapter 12 L Commands