2011

Table Of Contents
Previous
Highlights the previous interference object.
Next
Highlights the next interference object.
-INTERFERE
Quick Reference
See also:
Check 3D Models for Interferences
Summary
INTERFERE highlights all interfering 3D solids and displays the number of
objects selected and the number of interfering pairs.
If you define a single selection set, INTERFERE checks all the solids in the set
against one another. If you define two selection sets, INTERFERE checks the
solids in the first selection set against those in the second selection set. If you
include the same 3D solids in both selection sets, INTERFERE considers the
3D solid part of the first selection set and ignores it in the second selection
set.
List of Prompts
The following prompts are displayed.
Check for interferences between 2 sets of objects or within 1 set of objects...
Select first set of objects or [
Nested selection]: Use an object selection method or
enter an option
Select second set of objects or [
Nested selection/checK current] <checK>: Use
an object selection method, enter n, or press Enter to check for interferences
Create Interference Objects Creates and highlights new 3D solids on the
current layer that are the intersections of the interfering pairs of 3D solids.
If there are more than two interfering 3D solids, it may not be clear which
pairs are interfering if all the interfering 3D objects are highlighted at once.
Zoom to pairs of interfering objects
528 | Chapter 10 I Commands