2011

IMAGECLIP
Quick Reference
See also:
■ Clip Raster Images
Crops the display of a selected image to a specified boundary.
Access Methods
Menu: Modify ➤ Clip ➤ Image
Summary
The clipping boundary determines the portion of a raster image that is hidden,
either outside or inside the boundary. The visibility of the clipping boundary
is controlled by the
IMAGEFRAME system variable. The boundary you specify
must be in a plane parallel to the image object.
List of Prompts
The following prompts are displayed.
On
Turns on clipping and displays the image clipped to the previously defined
boundary.
Off
Turns off clipping and displays the entire image and frame.
If you reclip the image while clipping is turned off, clipping is automatically
turned back on. You are prompted to delete the old boundary even when
clipping is turned off and the clipping boundary is not visible.
Delete
Removes a predefined clipping boundary and redisplays the full original image.
New Boundary
Defines a rectangular or polygonal clipping boundary, or generates a polygonal
clipping boundary from a polyline.
NOTE You can only create a new clipping boundary for a selected IMAGE underlay
after the old boundary is deleted.
IMAGECLIP | 513