2011

with dynamic UCS (DUCS), so you can dynamically drag the selected objects
and align them with the face of a solid object.
Specify base point or [Copy]: Specify a point or enter c to create a copy
The base point of the source object will be moved to the base point of the
destination.
Specify second point or [Continue] <C>: Specify a point on the object’s X axis, or
press Enter to skip forward to specifying destination points
The second point specifies a new X axis direction within a plane parallel to
the XY plane of the current UCS. If you press Enter instead of specifying a
second point, the X and Y axes are assumed to be parallel with the X and Y
axes of the current UCS.
Specify third point or [Continue] <C>: Specify a point on the object’s positive XY
plane, or press Enter to skip forward to specifying destination points
The third point fully specifies the orientation of the X and Y axes of the source
object that will be aligned with the destination plane.
Specify destination plane and orientation . . .
Specify first destination point: Specify a point
This point defines the destination of the base point of the source object.
Specify second source point or [eXit] <X>: Specify a point for the X axis of the
destination or press Enter
The second point specifies a new X axis direction for the destination within
a plane parallel to the XY plane of the current UCS. If you press Enter instead
of specifying a second point, the X and Y axes of the destination are assumed
to be parallel with the X and Y axes of the current UCS.
Specify third destination point or [eXit] <X>: Specify a point for the destination’s
positive XY plane, or press Enter
The third point fully specifies the orientation of the X and Y axes of the
destination plane.
NOTE If the destination is a plane on an existing solid object, you can define the
destination plane with a single point by turning on dynamic UCS.
16 | Chapter 1 3D Commands