2011

Table Of Contents
Access Methods
Command entry: 'elev for transparent use
Summary
ELEV controls only new objects; it does not affect existing objects. The
elevation is reset to 0.0 whenever you change the coordinate system to the
world coordinate system (WCS).
List of Prompts
The following prompts are displayed.
Specify New Default Elevation The current elevation is the default Z value
for new objects when you specify only X and Y values for a 3D point.
The elevation setting is the same for all viewports regardless of their user
coordinate systems (UCS definitions). New objects are created at the specified
Z value relative to the current UCS in the viewport.
Specify New Default Thickness The thickness sets the distance to which a
2D object is extruded above or below its elevation. A positive value is extruded
along the positive Z axis; a negative value is extruded along the negative Z
axis.
398 | Chapter 6 E Commands