2011

Table Of Contents
special characters or symbols. See Control Codes and Special Characters on
page 1045.
If alternate units are not turned on in the dimension style, you can display
them by entering square brackets ([ ]). For more information, see Change
Existing Objects.
The current dimension style determines the appearance of the generated
measurements.
Text Customizes the dimension text at the Command prompt. The generated
dimension measurement is displayed within angle brackets.
To include the generated measurement, use angle brackets (< >) to represent
the generated measurement. If alternate units are not turned on in the
dimension style, you can display alternate units by entering square brackets
([ ]).
Dimension text properties are set on the Text tab of the New, Modify, and
Override Dimension Style dialog boxes.
Angle Changes the angle of the dimension text.
Also determines the angle of the dimension line and the location of the
dimension text.
Specify Jog Location Locates the middle point of the jog. The transverse
angle of the jog is determined by the Dimension Style Manager.
DIMJOGLINE
Quick Reference
See also:
Dimension Jog
Adds or removes a jog line on a linear or aligned dimension.
Access Methods
Button
DIMJOGLINE | 291