2011

Second Constraint Point Specifies the second point of the object to be
constrained.
Dimension Line Location Determines where the dimension line is located
on the constrained object.
Object
Selects an object instead of a constraint point.
Dimension Line Location
Dimension Line Location on page 245
Point & Line
Selects a point and a line object. The aligned constraint controls the distance
between a point and the closest point on a line.
Constraint Point
Constraint Point on page 244
Line Selects a line object.
Dimension Line Location Dimension Line Location on page 245
2Lines
Selects two line objects. The lines are made parallel and the aligned constraint
controls the distance between the two lines.
First Line Select the first line to be constrained.
Second Line to Make Parallel Select the second line to constrain the distance
between the two selected lines.
Dimension Line Location Dimension Line Location on page 245
DCANGULAR
Quick Reference
See also:
■ Apply Dimensional Constraints
Constrains the angle between line or polyline segments, the angle swept out
by an arc or a polyline arc segment, or the angle between three points on
objects.
DCANGULAR | 245