2011

Table Of Contents
BOX
Quick Reference
See also:
Create a Solid Box
Creates a 3D solid box.
Access Methods
Button
Toolbar: Modeling tool set Solids - Create tool group Solid
Primitives flyout Box
Menu: Draw 3D Modeling Box
List of Prompts
The following prompts are displayed.
Specify first corner or [Center]: Specify a point or enterc for center
Specify other corner or [
Cube/Length]: Specify the other corner of the box or
enteran option
If the other corner of the box is specified with a Z value that differs from the
first corner, then no height prompt is displayed.
Specify height or [
2Point] <default>: Specify the height or enter 2P for the 2 Point
option
Entering a positive value draws the height along the positive Z axis of the
current UCS. Entering a negative value draws the height along the negative
Z axis.
The base of the box is always drawn parallel to the XY plane of the current
UCS (workplane). The height of the box is specified in the Z-axis direction.
You can enter both positive and negative values for the height.
BOX | 141