2011

Table Of Contents

MLEADERSCALE

Quick Reference

See also:

■ Create and Modify Leaders

RealType:

DrawingSaved in:

1.0000Initial value:

Sets the overall scale factor applied to multileader objects.

Use

DIMSCALE to scale leader objects created with the LEADER command.

A reasonable default value is computed based on the

scaling between the current model space viewport and

0.0

paper space. If you are in paper space or model space and

not using the paper space feature, the scale factor is 1.0.

A scale factor is computed that leads text sizes, arrowhead

sizes, and other scaled distances to plot at their face values.

MLEADERSCALE does not affect measured lengths, coordinates, or angles.

When MLEADERSCALE is set to 0, and the current multileader style is not ,

the overall multileader scale of multileader objects created in paper space

viewports is determined by the viewport scale. When the current multileader

style is annotative, the MLEADERSCALE value is set to 0. Changes to the

MLEADERSCALE value are ignored and the value is reset to 0.

MSLTSCALE

Quick Reference