2011

Table Of Contents
Controls whether the 3D Move, 3D Rotate, or 3D Scale operation starts
automatically when you start the MOVE, ROTATE, or SCALE command in a
viewport with a 3D visual style.
Does not automatically start the 3DMOVE, 3DROTATE,
or 3DSCALEcommands when the MOVE, ROTATE, or
SCALE commands are started in a 3D view.
0
Automatically starts the 3DMOVE, 3DROTATE, or 3DSCALE
commands when the MOVE, ROTATE, or SCALE com-
mands are started in a 3D view.
1
GTLOCATION
Quick Reference
See also:
Use the Gizmos
IntegerType:
RegistrySaved in:
1Initial value:
Controls the initial location of the 3D Move, 3D Rotate, or 3D Scale gizmo
when you select objects before you start a command in a viewport with a 3D
visual style.
Places the 3D Move, 3D Rotate, or 3D Scale gizmo at the
same location as the UCS icon. The gizmo orientation is
aligned with the current UCS.
0
Places the 3D Move, 3D Rotate, or 3D Scale gizmo at the
geometric center of the selection set.
1
This system variable affects the display of the 3D Move, 3D Rotate, and 3D
Scale gizmos. Gizmos were previously known as grip tools.
GTLOCATION | 1347