2011

Table Of Contents
The FRAME setting overrides the individual XCLIPFRAME and IMAGEFRAME
settings.
The frame is not visible and it is not plotted.0
The frame temporarily reappears during selection preview
or object selection.
Displays and plots the frame.1
Displays but does not plot the frame.2
The individual setting varies for all underlays in the current
drawing (external references and raster images have dif-
ferent frame settings).
3
NOTE This value is used internally by AutoCAD for Mac.
FRONTZ
Quick Reference
See also:
Create a 3D Dynamic View (DVIEW)
(Read-only)
RealType:
DrawingSaved in:
0.0000Initial value:
Stores the front clipping plane offset from the target plane for the current
viewport, in drawing units.
The front clipping and front clip not at eye bitcodes in VIEWMODE are on. The
FRONTZ value is the last front clipping plane value set current with the DVIEW
command. The distance of the front clipping plane from the camera point is
found by subtracting FRONTZ from the camera-to-target distance.
1330 | Chapter 33 F System Variables