2011

Sets the visual style that is displayed while creating 3D solid and mesh
primitives and extruded solids, surfaces, and meshes.
You can enter a period (.) to specify the current visual style. DRAGVS can only
be set to a visual style that is saved in the drawing.
DRAGVS has no effect when the current viewport's visual style is set to 2D
Wireframe.
The visual style specified for DRAGVS cannot be removed with the PURGE
command.
DRAWORDERCTL
Quick Reference
See also:
■ Control How Overlapping Objects Are Displayed
IntegerType:
DrawingSaved in:
3Initial value:
Controls the default display behavior of overlapping objects when they are
created or edited.
Turns off the default draw order of overlapping objects:
after objects are edited, regardless of their draw order,
0
the objects are displayed on top until a drawing is regen-
erated (REGEN) or reopened. This setting also turns off
draw order inheritance: new objects that are created from
another object using the commands listed below are not
assigned the draw order of the original object. Use this
setting to improve the speed of editing operations in large
drawings. The commands that are affected by inheritance
are BREAK, FILLET, HATCH, HATCHEDIT, EXPLODE, TRIM,
JOIN, PEDIT, and OFFSET.
Turns on the default draw order of objects: after objects
are edited, they are automatically displayed according to
the correct draw order.
1
1298 | Chapter 31 D System Variables