2011

Places the dimension text on the side of the dimension
line farthest away from the defining points.
2
Places the dimension text to conform to Japanese Industrial
Standards (JIS).
3
Places the dimension text below the dimension line.4
DIMTDEC
Quick Reference
See also:
■ Display Lateral Tolerances
IntegerType:
DrawingSaved in:
4 (imperial) or 2 (metric)Initial value:
Sets the number of decimal places to display in tolerance values for the primary
units in a dimension.
This system variable has no effect unless DIMTOL is set to On. The default for
DIMTOL is Off.
DIMTFAC
Quick Reference
See also:
■ Set the Scale for Dimensions
RealType:
DrawingSaved in:
1.0000Initial value:
Specifies a scale factor for the text height of fractions and tolerance values
relative to the dimension text height, as set by DIMTXT.
DIMTDEC | 1263