2011

If the SURFACEASSOCIATIVITY on page 1507 system variable is set to 1, the
DELOBJ setting is ignored.
All defining geometry is retained.0
Deletes profile curves, including those used with the EX-
TRUDE, SWEEP, REVOLVE, and LOFT commands. Removes
1
all defining geometry for CONVTOSOLID on page 214,
CONVTOSURFACE on page 216, CONVTONURBS on page
213, and CONVTOMESH on page 212 commands. Cross
sections used with the LOFT command are also deleted.
Deletes all defining geometry, including paths and guide
curves used with the SWEEP and LOFT commands.
2
Deletes all defining geometry, including paths and guide
curves used with the SWEEP and LOFT commands if the
3
action results in a solid object. Removes all defining geo-
metry for CONVTOSOLID, CONVTOSURFACE, CONVTON-
URBS, and CONVTOMESH commands.
Displays prompts to delete profile curves, including those
used with the EXTRUDE, SWEEP, REVOLVE, and LOFT
-1
commands. Prompts to remove cross sections used with
the LOFT command.
The original geometry for CONVTOSOLID, CONVTOSUR-
FACE, and CONVTOMESH commands is removed without
prompting.
Displays prompts to delete all defining geometry, including
paths and guide curves used with the SWEEP and LOFT
commands.
-2
The original geometry for CONVTOSOLID, CONVTOSUR-
FACE, and CONTOMESH commands is removed without
prompting.
Displays prompts to delete all defining geometry if the
resulting entities are a surface of any type. Deletes all ori-
-3
ginal geometry resulting in a solid entity, original geometry
for CONVTOSOLID, CONVTOSURFACE, CONVTONURBS,
and CONVTOMESH commands is removed without
prompting
DELOBJ | 1229