2011

Base point settings by object
Default base pointObject type
MidpointConstruction lines
Grip pointRegion
Set to Object's Default
Uses the default base point of the object to position the arrayed object. To
manually set the base point, clear this option.
Base Point
NOTE To avoid unexpected results, set the base point manually if you are
constructing a polar array and do not want to rotate the objects.
Select Objects
Specifies the objects used to construct the array. You can select objects before
or after the Array dialog box is displayed. To select objects when the Array
dialog box is displayed, choose Select Objects. The dialog box temporarily
closes. When you finish selecting objects, press ENTER. The Array dialog box
is redisplayed, and the number of objects selected is shown below the Select
Objects button.
NOTE If you select multiple objects, the base point of the last selected object is
used to construct the array.
Preview Area
Shows a preview image of the array based on the current settings in the dialog
box. The preview image is dynamically updated when you move to another
field after changing a setting.
Preview
Closes the Array dialog box and displays the array in the current drawing.
90 | Chapter 2 A Commands