2011

Table Of Contents
Transparency value determined by blockByBlock
Fully opaque (not transparent)0
Transparency value defined as a percentage1-90
To change the transparency of existing objects, use the Properties Inspector
or Layers palette.
NOTE Transparency is limited to 90 percent to avoid confusion with layers that
are turned off or frozen.
The transparency level for new hatch objects is controlled by the
HPTRANSPARENCY system variable.
CHAMFERA
Quick Reference
See also:
Create Chamfers
RealType:
DrawingSaved in:
0.0000Initial value:
Sets the first chamfer distance when CHAMMODE is set to 0.
CHAMFERB
Quick Reference
See also:
Create Chamfers
RealType:
DrawingSaved in:
0.0000Initial value:
CHAMFERA | 1199