2011

Table Of Contents
B System Variables
BACKZ
Quick Reference
See also:
Create a 3D Dynamic View (DVIEW)
(Read-only)
RealType:
DrawingSaved in:
0.0000Initial value:
Stores the back clipping plane offset from the target plane for the current
viewport, in drawing units.
Meaningful only if clipping is specified in CAMERA, DVIEW, or 3DCLIP. If there
are several cameras, the value is the last back clipping plane that you set current.
The distance of the back clipping plane from the camera point can be found by
subtracting BACKZ from the camera-to-target distance.
BINDTYPE
Quick Reference
See also:
Archive Drawings That Contain Referenced Drawings (Bind)
29
1189