2011

another person is currently editing the xref file, the most recently saved version
is attached.
Specify Insertion Point
Specify a point or enter an option
Scale Sets the scale factor. All X and Y dimensions of the xref are multiplied
by the X and Y scale factors. The xref is rotated by the specified angle, using
the insertion point as the center of rotation.
X, Y, and Z Sets X, Y, and Z scale factors.
■ X Scale Factor. Defines X, Y, and Z scale factors for the xref.
■ Corner. Defines the X and Y scales at the same time, using the insertion
point and another point as the corners of a box, and then defines the Z
scale.
Rotate Sets the angle of insertion for the xref.
PScale Sets the scale factor for the X, Y, and Z axes to control the display of
the xref as it is dragged into position.
PX, PY, and PZ Sets the X, Y, and Z axes to control the display of the xref as
it is dragged into position.
PRotate Sets the rotation angle of the xref as it is dragged into position.
-XREF | 1157