2011

Table Of Contents
Remove Removes both the front and back clipping planes.
Delete
Removes a clipping boundary for the selected xref or block. To temporarily
turn off a clipping boundary, use the Off option. Delete erases the clipping
boundary and the clipdepth. The
ERASE command cannot be used to delete
clipping boundaries.
Generate Polyline
Automatically draws a polyline coincident with the clipping boundary. The
polyline assumes the current layer, linetype, lineweight, and color settings.
Use this option when you want to modify the current clipping boundary using
PEDIT and then redefine the clipping boundary with the new polyline. To see
the entire xref while redefining the boundary, use the Off option.
New Boundary
Defines a rectangular or polygonal clipping boundary, or generates a polygonal
clipping boundary from a polyline.
Select Polyline Defines the boundary with the selected polyline. The polyline
can be open but must consist of straight line segments and cannot intersect
itself.
Polygonal Defines a polygonal clipping boundary with three or more points
that you specify for the vertices of a polygon.
Rectangular Defines a rectangular boundary with the points that you specify
for opposite corners.
Invert Clip Inverts the mode of the clipping boundary: objects are clipped
either outside the boundary or inside the boundary.
NOTE You can only create a new clipping boundary for a selected XREF underlay
when the old boundary is deleted.
XEDGES
Quick Reference
See also:
Create Wireframe Models
XEDGES | 1149