2011

End Point Draws an arc counterclockwise from the start point (2) to an
endpoint that falls on an imaginary ray drawn from the center point (1)
through a specified point (3).
Angle Draws an arc counterclockwise from the start point (2) using a center
point (1) with a specified included angle. If the angle is negative, a clockwise
arc is drawn.
Specify included angle:
Chord Length Draws either a minor or a major arc based on the distance of
a straight line between the start point and endpoint.
If the chord length is positive, the minor arc is drawn counterclockwise from
the start point. If the chord length is negative, the major arc is drawn
counterclockwise.
Specify length of chord:
Tangent to Last Line, Arc, or Polyline
Draws an arc tangent to the last line, arc, or polyline drawn when you press
ENTER at the first prompt.
Specify end point of arc: Specify a point (1)
80 | Chapter 2 A Commands