2011

Summary
To trim objects, select the boundaries. Then press Enter and select the objects
that you want to trim. To use all objects as boundaries, press Enter at the first
Select Objects prompt.
List of Prompts
The following prompts are displayed.
Current settings: Projection = current, Edge = current
Select cutting edges...
Select objects or <select all>: Select one or more objects and press Enter, or press
Enter to select all displayed objects
Select the objects that define the cutting edges to which you want to trim an
object, or press Enter to select all displayed objects as potential cutting edges.
TRIM projects the cutting edges and the objects to be trimmed onto the XY
plane of the current user coordinate system (UCS).
NOTE To select cutting edges that include blocks, you can use only the single
selection, Crossing, Fence, and Select All options.
Select object to trim on page 1067 or shift-select to extend on page 1067 or [Fence
on page 1067/Crossing on page 1067/Project on page 1067/Edge on page 1068/eRase
on page 1069/Undo on page 1069]: Select an object to trim, hold down SHIFT and
select an object to extend it instead, or enter an option
1066 | Chapter 20 T Commands