2011

Table Of Contents

Projection Direction The cutting geometry is projected onto the surface.

Controls the projection angle as follows:

Automatic

■ When trimming a surface or region in plan, parallel view

(for example, the default Top, Front, and Right view), the

cutting geometry is projected onto the surface in the view

direction.

■ When trimming a surface or region with a planar curve in

an angled parallel or perspective view, the cutting geo-

metry is projected onto the surface in a direction perpen-

dicular to the curve plane.

■ When trimming a surface or region with a 3D curve in an

angled, parallel or perspective view (for example, the de-

fault perspective view), the cutting geometry is projected

onto the surface in a direction parallel to the Z direction

of the current UCS.

Projects the geometry based on the current view.View

Projects the geometry in the +Z and -Z axis of the current UCS.UCS

The surface will only be trimmed if the cutting curve lies on

the surface.

None

SURFUNTRIM

Quick Reference