2011

Delete
Removes a selected control vertex.
Elevate Order
Increases the polynomial order (degree plus one) of the spline. This results in
increasing the number of control vertices across the spline.
The maximum value is 26.
Move
Relocates a selected control vertex.
■ New Location on page 993
■ Next on page 994
■ Previous on page 994
■ Select Point on page 994
Weight
Changes the weight of a specified control vertex.
New Weight Recalculates the spline based on the new weight value for the
specified control vertex. A larger value pulls the spline closer to the control
vertex.
■
Next on page 994
■ Previous on page 994
■ Select Point on page 994
Exit
Returns to the previous prompt.
Convert to Polyline
Converts the spline to a polyline.
The precision value determines how closely the resulting polyline matches
the spline. Valid values are any integer between 0 and 99.
NOTE A high precision value will decrease performance.
The PLINECONVERTMODE system variable determines whether the polylines
are created with linear or arc segments.
The DELOBJ system variable determines whether the original spline is retained.
SPLINEDIT | 995