2011

Zebra Tab (Analysis Options Dialog Box)
Quick Reference
See also:
■ Analyze Surfaces
Changes the display settings for the ANALYSISZEBRA command.
List of Options
The following options are displayed.
Select Objects to Analyze
Prompts you to select the surface objects to analyze. When you are done
selecting objects, press Enter to return to the dialog box.
Stripe Display
Stripe Direction
Specifies the display angle. (
VSAZEBRADIRECTION on page 1559) This option
is only available when Type is set to Cylinder. If you are using the Chrome
Ball type, change the stripe directions with the VSAZEBRADIRECTION on
page 1559 system variable.
Type
Sets analysis display type. (
VSAZEBRATYPE on page 1560)
Size
Sets the width of the zebra stripes. (VSAZEBRASIZE on page 1560)
Color 1
Sets the first color for zebra stripes. (
VSAZEBRACOLOR1 on page 1558)
Color 2
Sets the second color for zebra stripes. (VSAZEBRACOLOR2 on page 1559)
Clear Zebra Analysis
Removes the zebra display from all objects in the current drawing.
66 | Chapter 2 A Commands