2011

Exit
Exit
Exits the SOLIDEDIT command.
SOLPROF
Quick Reference
See also:
■ Create a Flattened View
Creates 2D profile images of 3D solids for display in a layout viewport.
Access Methods
Menu: Draw ➤ 3D Modeling ➤ Setup ➤ Profile
Summary
The selected 3D solids are projected onto a 2D plane parallel with the current
layout viewport. The resulting 2D objects are generated on separate layers for
hidden and visible lines and are displayed only in that viewport.
List of Prompts
The following prompts are displayed.
Select objects: Use an object selection method
Display hidden profile lines on separate layer? [Yes/No] <Y>: Enter y or n, or
press Enter
Yes Generates only two blocks: one for the visible lines and one for the hidden
lines of the entire selection set. When you generate hidden lines, solids can
partially or completely hide other solids. The visible profile block is drawn in
the BYLAYER linetype, and the hidden profile block is drawn in the HIDDEN
linetype (if loaded). The visible and hidden profile blocks are placed on
uniquely named layers using the following naming conventions:
PV-viewport handle for the visible profile layer
PH-viewport handle for the hidden profile layer
For example, if you create a profile in a viewport whose handle is 4B, the
blocks containing the visible lines are inserted on layer PV-4B, and the block
containing the hidden lines (if requested) is inserted on layer PH-4B. If these
SOLPROF | 973