2011

Face: Undo
Reverses actions as far back as the beginning of the SOLIDEDIT session.
Face: Exit
Exits the face-editing options and displays the Enter a Solids Editing Option
prompt.
Edge
Edge
Edits 3D solid objects by changing the color of or copying individual edges.
Enter an edge editing option [Copy/coLor/Undo/eXit] <eXit>:
Edge: Copy
Copies selected edges on a 3D solid as 2D arcs, circles, ellipses, lines, or splines.
Retains the angle of the edge and allows you to make modifications and
extensions, and create new geometry based on the extracted edge.
Provides a method for making modifications, extensions, and new 3D solids
based on the extracted edge.
■ Select Edges (copy)
■ Undo
■ Remove
Select Edges (copy) Specifies the edges to copy. Press Ctrl+click to select the
edge. Then set the displacement:
■ Base point of displacement. Sets the first point for determining where the
new object is placed.
■ Second point of displacement. Sets the relative direction and distance for
the new object.
968 | Chapter 19 S Commands