2011

Table Of Contents
2 Click Schematic tab Other Tools panel Drawing Properties
drop-down Drawing Properties.
3 In the Drawing Properties dialog box, click the Drawing Format tab.
4 In the Ladder Defaults section, make the appropriate changes and click
OK.
5 Save and exit the template drawing.
Changing attribute values
1 Open the WD_M drawing found at:
Windows XP: \Documents and Settings\All
Users\Documents\Autodesk\Acade {version}\libs\{library}\WD_M.dwg
Windows Vista, Windows 7: \Users\Public\Documents\Autodesk\Acade
{version}\libs\{library}\WD_M.dwg
2 Change the default values of the attribute definitions.
DLADW: default ladder width
RUNGDIST: default ladder rung spacing
PH3SPACE: default 3-phase spacing
3 Save and exit the drawing.
You can permanently change the relative position of line reference numbers
and text size by modifying the RUNGFIRST attribute definition.
1 Display the drawing of the MLR block. The file names found at
Windows XP: \Documents and Settings\All
Users\Documents\Autodesk\Acade {version}\libs\{library}\
Windows Vista, Windows 7: \Users\Public\Documents\Autodesk\Acade
{version}\libs\{library}\
are:
WD_MLRH.dwg: for horizontal rung / vertical ladders
WD_MLRV.dwg: for vertical rung / horizontal ladders
Define and insert new ladders | 959