2011

2 Select the wire to remain solid.
3 Select the crossing wire to have the gap.
The gap inserts into the second wire.
NOTE You can turn off the automatic gap/loop feature by selecting Solid in the
Wiring Style section of the Drawing Properties ➤ Style dialog box.
Remove wire gaps
Deletes gaps/loops that are no longer needed in an existing wire.
1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ ➤
Modify Wire Gap drop-down ➤ Delete Wire Gap.
2 Select the wire segments near the unneeded gaps.
The gap is removed from the second wire.
Flip wire gaps
The Flip Gap command switches a wire crossing gap or loop to the other
crossing wire.
The gapped wire becomes solid and the gap/loop flips to the crossing wire.
Manipulate wire gaps | 957