2011

Table Of Contents
Installation Code
Changes the installation codes. You can search the current drawing or entire
project for installation codes. AutoCAD Electrical does a quick read of all the
current or selected drawing files and returns a list of all installation codes used
so far. Pick from the list to update the component automatically with the
installation code.
Assign short installation codes to components like "PNL" and "FIELD." Later,
you can take full advantage of the AutoCAD Electrical ability to create
location-specific BOM and component lists.
Location Code
Changes the location codes. You can search the current drawing or entire
project for location codes. AutoCAD Electrical does a quick read of all the
current or selected drawing files and returns a list of all location codes used
so far. Pick from the list to update the component with the location code
automatically.
Assign short location codes to components like "PNL" and "FIELD." Later, you
can take full advantage of the AutoCAD Electrical ability to extract wire and
cable from/to reports, and location-specific BOM reports. (For example, BOM
for all field cables, BOM for all PNL cables.)
Show/edit miscellaneous
View or edit any attributes that are not predefined AutoCAD Electrical
attributes.
Insert or edit cable marker (parent wire): IEC
Cable markers carry a cable TAG value, just like any parent/child device
combination. They can also carry a conductor color value (carried as a
RATING1 attribute value on the marker block symbol). The parent symbol
has provision to carry MFG/CAT part number information. If the particular
cable is referenced in the AutoCAD Electrical cable conductor database table
(_W0_CBLWIRES within your Access catalog file), AutoCAD Electrical can
track conductors used versus conductors available.
Ribbon: Schematic tab Insert Wires/Wire Numbers panel Cable
Markers drop-down Cable Markers.
Insert cable markers into wires | 939