2011

Table Of Contents
NOTE The wire breaks around the inline marker.
1 Click Schematic tab Insert Wires/Wire Numbers panel Wire
Number Leader drop-down In-Line Wire Labels.
The Insert Component dialog displays with a selection of predefined
in-line markers and user-defined markers.
2 Select a marker and place it on a wire.
NOTE If the label is too wide, use the Squeeze Attribute/Text tool. You can
also use the Adjust In-Line Wire/Label Gap tool to adjust the gap width rather
than squeezing the attribute to fit the gap.
3 Press ESC to exit the command.
TIP You can also create wider marker symbols by following the block naming
convention for terminal symbols
on page 294. For example, the horizontal Red
marker's file name is C:\Documents and Settings\All
Users\Documents\Autodesk\Acade 2007\Libs\Jic1\jic1\HTO_RED.dwg and the
vertical version is C:\Documents and Settings\All
Users\Documents\Autodesk\Acade {version}\Libs\Jic1\jic1\VTO_RED.dwg.
Libraries are in C:\Users\Public\Documents\Autodesk\Acade 2007\Libs\ on a
Windows Vista or Windows 7 installation. AutoCAD Electrical keys off of the first
four characters of the block/drawing name.
Insert component
This icon menu can be modified, expanded, or replaced with a custom menu.
You can change the default icon menu using the Library and Icon Menu Paths
Insert in-line wire markers | 925