2011

Table Of Contents
Changes the lines to the selected wire type in the
wire type grid.
Convert Line(s) to Wire(s)
OK
NOTE This option is available only when one wire type record is selected in the
list.
Makes the selected wire type the current wire type. If the selected wire type
does not exist on the drawing, the wire layer is created on the fly. The wire
layer name and properties are saved in the drawing file. For the layer to create,
the following rules apply:
The layer name must be unique
The layer name cannot be left blank
The layer name cannot contain special characters such as / \ " : ; ? * | , = '
> <
Use the grid control to sort and select the wire types for modification.
Set wire type
This tool sets wire types for new wires. Use the grid control to sort and select
the wire types for modification.
TIP Use the Create/Edit Wire Type tool to create and edit wire types or the
Change/Convert Wire Type tool to convert lines to wires.
Type "T" at the command prompt during wire insertion.
910 | Chapter 12 Wire/Wire Number Tools