2011

Table Of Contents
Pick Like - temporarily exits the Location Box
dialog box so you can select an existing install-
ation code value on the drawing.
By default, all location and installation values on
schematic parent symbols inside the location box,
Update existing parent symbols values to match
the location box
update to match the values of the location box.
Uncheck this option to keep the values on the
symbols.
By default, location and installation values on all
symbols are made invisible.
Force Installation and Location attributes to be
visible or invisible
Uncheck so no visibility changes are made.
If checked, select to set the visibility for the
location and installation attributes.
Dashed Box Information
Specifies the description height. Description height
can be entered in the edit box or picked from an
existing device from the active drawing.
Text Height
Specifies the description text.Box Description
Specifies the description insertion point: top, bot-
tom, left or right. Enter a description to enable the
button.
Description Insert Point
NOTE If the location box is not a rectangle, this
button is disabled.
Enters ={installation value}+{location value} as the
box description.
Use =Installation+Location Values
Enters {location value}-{installation value} as the
box description.
Use Location-Installation Values
Searches the active drawing for location box descrip-
tions. Displays the list in the All Location Box De-
Drawing
scriptions - Drawing dialog box. Select a description
from the list.
Location box | 891