2011

R E M O T E S T A T I O N S Y M B O L S
Main Operator sta | wdxx_mos | wdxx_mos
Wash-down sta | wdxx_wds | wdxx_wds
**M101
L2
C U S T O M E R S Y M B O L S
Customer power | wdxx_cp | wdxx_cp
Customer furnished | wdxx_cf | wdxx_cf
NOTE You only need to define the L*W row if you plan on using this .dat file in
a version of AutoCAD Electrical before AutoCAD Electrical 2008.
Location box
A location box is drawn around devices to designate that they are physically
in a different location/installation than the other devices in the drawing. The
box is a closed polyline and can be a rectangle or some other orthogonal shape.
The Location and installation codes for the parent components within the
location box update to match the location box. You can assign a description
to the box. The program prompts for updates to related components and panel
footprints.
AutoCAD Electrical commands are location box aware:
■ Inserting or moving a component into a location box updates the location
and installation values of the component.
■ Moving a component out of a location box prompts the option to update
the location and installation values of the component to match the drawing
values.
■ The insertion point of a component determines whether it is considered
inside or outside a location box.
AutoCAD Electrical circuit commands are not location box aware. For example,
if a circuit is inserted and some of the components fall within a location box,
the components are not updated.
NOTE Using standard AutoCAD commands do not trigger any updates.
Location box | 887