2011

footprints, wire numbers, terminals, wire jump arrows). A copy of this
information is extracted and maintained in a USER table in the project
database. This allows you to do queries on the project database file (in
Microsoft Access format) and access all of this user information carried on all
entities project-wide. This data is stored on the entities as invisible extended
entity data. You are free to use this data in any way you see fit.
Examples: storing explicit wire sequencing information, cable or wire lengths,
routing information, storing special parts information, descriptions, or MRP
data, storing engineering notes, setup, or maintenance information, and so
on.
Each application data record that you add to an entity can be up to 255
characters long. A single AutoCAD Electrical entity can carry several hundred
of these records. Each record is tracked on the entity by entity handle plus a
three digit record number beginning at "000". This same information is
automatically maintained, project-wide, by AutoCAD Electrical in the user
table of the project's database file.
Edit user table data
You can add, edit, or remove free-form user data records attached to the
selected block insert. These records are stored in a user database table in the
project database file.
Ribbon: Schematic tab ➤ Edit Components panel ➤ Edit Components
drop-down ➤ User Table Data.
Toolbar: Edit Component
Menu: Components ➤ Component Miscellaneous ➤ Edit User Table
Data
Command entry: AEUSERTABLE
Lists the record number for the selected block insert.Record number
Lists the user data for the record number.Data
Specifies the new data for the selected record number. Note that
there is a 255 character maximum per record.
Edit
Adds a new user data record. A separate dialog box displays where
you can enter the record data and number.
Add new
854 | Chapter 10 Component Tools