2011

Table Of Contents
Wire Signals
Updates the from/to cross-reference annotation on
each wire network source and destination arrow
symbol.
Update source/destination cross-refer-
ences
Makes the wire number tags on the destination end
match the wire number carried on the source end
of each wire signal pair.
Update source/destination wire number
tags
Stand-Alone Cross-Reference Symbols
Set up the desired cross-reference format in the Cross-Reference Format section
of the Drawing Properties Cross-Reference dialog box. It is on a per-drawing
basis.
Updates the cross-reference annotation between
pairs of stand-alone cross-reference symbols. They
Update stand-alone cross-reference sym-
bols
are wire number signal symbols, but without a
WIRENO attribute and do not attach to wires. They
can float. See
Stand-alone source or destination cross-
reference symbol on page 843.
Insert dashed link lines
Insert a dashed link line
Links selected components with a dashed line.
The TAG, description, and cross-referencing attributes of the second through
last components you select for linking become invisible. The Unhide Attribute
command turns the visibility of the selected attributes back on. Components
must have X?LINK attributes to link.
Insert dashed link lines | 845