2011

Table Of Contents
If a component is retagged (retag, move component, move circuit, edit
component) the cross-reference table updates if the tag is part of the title.
Component Retag
If a replaceable parameter is modified for a component that has a cross-
reference table, the table title updates to reflect the changes.
Edit Component
When copying a different catalog number to a parent symbol, the PINLIST
and contact count may update and the cross-reference table updates in
real time.
Copy Catalog Assignment
If IEC drawing-wide Location or Installation values change, the cross-refer-
ence table title updates to reflect the changes.
IEC Tagging Mode
If a circuit with a cross-reference table is copied, the table title updates
with the new tag values.
Copy Circuit
If inserting a parent component with a cross-reference table, the table in-
serts at the cross-reference attribute locations (XREF and XREFNO). If in-
Insert Component
serting a child component, the cross-reference table updates for the parent
component.
If scooting a parent component with a cross-reference table, the table also
scoots along the wire.
Scoot
NOTE If you change the component catalog number or add a multiple BOM
catalog number to the component (both change the Pin List data) the
cross-reference table updates as soon as you exit out of the Insert/Edit Component
dialog box. Additionally, if you modify the Pin List manually on the parent
component, the cross-reference table updates with the new pin numbers and the
modified contact count once the Insert/Edit Component dialog box is exited.
Commands that do not support real-time cross-reference updates include:
Component Find and Replace
Spreadsheet Export and Import
Set cross-referencing display
Cross-reference settings are supported at the project, drawing, and component
level. Changes you make to the settings are automatically updated in real
time.
Update cross-reference tables | 833