2011

Table Of Contents
The common pin is on the right-hand side next to the referencing column
and displays in the P2 column of the table.
IEC
JIC
Table cross-reference format setup
This format displays cross-referencing in a table object that automatically gets
updated in real time, so you can define the columns to display. To display
component cross-referencing in a table, select a predefined table style and
define the column labels to display.
Ribbon: Project tab Project Tools panel Manager.
Toolbar: Main Electrical 2
Menu: Projects Project Project Manager
Command entry: AEPROJECT
In the Project Manager, right-click the project or drawing name, and select
Properties. Click the Cross-references tab. In the component Cross-reference
Display section, select Table Format, and click Setup.
If new contacts are added to the component, the cross-referencing table
automatically updates. The table location is based on cross-reference attributes.
You can move the table to any location on the drawing and the table remains
in the new position.
If you change the table setup once a table has been inserted onto the drawing,
run the Component Cross-reference tool to update the table.
Overview of table cross-reference formats | 827