2011

Project and Active drawing (all) remove overrides on all components on the
drawings while Active drawing (pick) removes overrides for selected
components only.
Text cross-reference format setup
This format displays cross-referencing as text with any user-defined string as
a separator between references on the same cross-reference attribute.
NOTE Mtext cross-referencing can still be used on selected components that use
text cross-referencing.
Ribbon: Project tab ➤ Project Tools panel ➤ Manager.
Toolbar: Main Electrical 2
Menu: Projects ➤ Project ➤ Project Manager
Command entry: AEPROJECT
In the Project Manager, right-click the project or drawing name and select
Properties. Click the Cross-References tab. In the component Cross-Reference
Display section, select Text Format, and click Setup.
NOTE You can also access this when you use Insert Component on page 742.
Select the component type to insert and specify the insertion point on the drawing.
In the Insert/Edit Component dialog box, Cross-Reference section, select
Component override and click Setup. In the Cross-reference component override
dialog box, select Text Format, and click Setup.
Format
The Reference Separator edit box allows you to define any string as a separator
between references on the same attribute. Spaces are allowed. The default
separator is a comma. Use "|" anywhere in the edit box to change the XREF
attribute to multi-line text and add a carriage return after each reference. The
separator value is applied to the drawing settings in the WD_M block definition
or the component to override the drawing settings.
When there are 2 or more references on the same cross-reference attribute
each reference is separated by the specified separator. If you use a comma as
the separator the references would look like the following examples:
NO 412,633
Overview of cross-reference settings | 819