2011

Table Of Contents
NOTE If your format includes the sheet number %S
parameter or the drawing number %D parameter,
enter the values in the edit boxes in Sheet Values
section of the Drawing Properties Drawing Set-
tings dialog box.
There are different styles of cross referencing Auto-
CAD Electrical supports:
Component Cross-Reference Display
Text Format: Displays cross-referencing as text
with any user-defined string as a separator
between references on the same attribute.
Graphical Format: Displays cross-referencing
using the AutoCAD Electrical graphical font or
contact mapping edit boxes while displaying
each reference on a new line.
Table Format: Displays cross-referencing in a
table object, that automatically gets updated in
real time, while allowing you to define the
columns to display.
Click Setup to display a dialog box for setting the
display defaults for each component cross-reference
display format.
Remove component overrides
You can apply overrides to a component so its settings override those of the
drawing or project. Use this tool to remove the component overrides so the
cross-referencing commands use the settings for the drawing or project.
Ribbon: Schematic tab Edit Components panel Modify Component
Cross-Reference drop-down Remove Component Override.
Toolbar: Cross-Reference
Menu: Components Cross-Reference Remove Component Override
Command entry: AERMOVERRIDE
Select to remove the component overrides on the project, active drawing, or
selected components on the drawing.
818 | Chapter 10 Component Tools