2011

Table Of Contents
1 Click Project tab Project Tools panel Manager.
2 In the Project Manager, right-click the project or drawing name, and
select Properties.
NOTE Selecting the project applies changes to the project definition file and
not the drawing. Apply the settings to drawings to see display changes.
3 Click the Cross-references tab. In the Component Cross-reference Display
section, select Text, Graphical, or Table Format and click Setup.
Text Format: Displays cross-referencing as text with any user-defined
string as a separator between references on the same attribute.
Graphical Format: Displays cross-referencing using the AutoCAD
Electrical graphical font or using contact mapping edit boxes while
displaying each reference on a new line.
Table Format: Displays cross-referencing in a table object so you can
define the columns to display.
4 Specify the format for the cross-reference display.
The Preview box shows an image that shows an example of the
cross-referencing format being defined.
5 Select the display options.
TIP See the Reference topics for each cross-reference display format to learn
about the various display options.
6 If you selected to use the Table Format style, specify the table style and
table title. Select a table style from the list. The list initially displays table
styles from the active drawing and from the table styles drawing. Click
Browse to select a drawing with the desired table style. Once selected, the
table style is applied to the Table Styles drawing.
To set the table title:
Select the allowable replaceable parameter entry from the selection
list
Enter the replaceable parameter
Enter text
816 | Chapter 10 Component Tools