2011

Table Of Contents
Panel terminals
This presents a list of all panel terminals extracted from the project's panel
layout drawings. As you pick an item from the pick list, the appropriate
schematic terminal is found and inserted in the drawing at your pick point.
After the selection of the schematic terminal and the annotation of the device
tag, all panel-related information such as descriptions, installation, and location
codes are copied to the schematic.
You can select to insert a single terminal block or multiple terminal blocks
from the panel list.
Ribbon: Schematic tab Insert Components panel Insert Components
drop-down Terminal (Panel List).
Toolbar: Insert Component
Menu: Components Insert Terminal (Panel List)
Command entry: AETERMINALPNL
Select Project and click OK. Select the files to process and click OK.
Sorts the list of panel terminals. You can specify four sorts to perform
on the list.
Sort List
Reopens the Panel Terminal List Schematic Terminals Insert dialog
box so you can re-extract data or select a saved external file to use.
Reload
Matches schematic components extracted from the project database
with panel terminal components and marks any existing components.
Mark Existing
An "x" displays in left-hand column for any listed panel component
tag that already has its schematic inserted on the drawing and there
is an exact match on catalog and manufacturer values between the
two. An "o" displays if the tags match but there is mismatch on
catalog and manufacturer values between the two.
Specifies to show all extracted panel data or hide the panel data that
has a matching schematic component.
Display
Performs a Bill of Material check and displays the result. This is enabled
if the selected panel terminal contains catalog data.
Catalog Check
Insert from panel lists | 795