2011

Panel terminal list -> schematic terminals insert
This report provides error checking between the schematics and the panel
layout drawings. The program looks at the selected drawings, both schematic
and panel, looking for a match. For each panel component, the routine tries
to find a matching schematic component based on tag, location, and
installation information. If a match is found, then it compares catalog
information looking for any discrepancies.
Ribbon: Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Terminal (Panel List).
Toolbar: Insert Component
Menu: Components ➤ Insert Terminal (Panel List)
Command entry: AETERMINALPNL
Specifies to export the data for the active drawing
or multiple drawings in the active project.
Extract terminal list for
Creates a comma-delimited file of the panel compon-
ent data. The extracted file name is the same as the
Save list to external file
project by default (project_name.WD4). You can
display this data in spreadsheet format (open it in
comma-delimited "CSV" format), edit, and then save.
Uses a previous project's terminal list to create a
spreadsheet listing. After the initial extraction, a list
of terminals displays for selection.
Browse
Extracts only the information for panel terminals with
specific installation values. Once you pick Named
Installation Codes to extract
Installation, you can type the installation code in the
box or click List: Drawing or List: Project to select
from a list of used installation codes.
Extracts only the information for panel terminals with
specific location values. Once you pick Named Loca-
Location Codes to extract
tion, you can type the location code in the box or
click List: Drawing or List: Project to select from a list
of used location codes.
794 | Chapter 10 Component Tools