2011

schematic symbol is found and inserted in the drawing at your pick point.
After the selection of the schematic component and the annotation of the
device tag, all panel-related information such as descriptions, installation, and
location codes are copied to the schematic.
You can select to insert a single schematic component or multiple components
from the panel list.
Ribbon: Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Panel List.
Toolbar: Insert Component
Menu: Components ➤ Insert Component (Panel List)
Command entry: AECOMPONENTPNL
Select Project and click OK. Select the files to process and click OK.
Sort List
Sorts the list of panel components. You can specify four sorts to perform on
the list.
Reload
Reopens the Panel Layout List ➤ Schematic Components Insert dialog box
so you can re-extract data or select a saved external file to use.
Mark Existing
Matches panel components extracted from the project database with schematic
components previously placed into the drawing and marks any existing
components. An "x" displays in left-hand column for any listed panel
component tag that already has its schematic component inserted on the
drawing and there is an exact match on catalog and manufacturer values
between the two. An "o" displays if the tags match but there is mismatch on
catalog and manufacturer values between the two.
Display
Specifies to show all extracted panel data or hide the panel data that has a
matching schematic component.
792 | Chapter 10 Component Tools