2011

This tool lists panel components extracted from your panel drawing, finds
the appropriate schematic symbol, and inserts the schematic components at
your pick point.
Ribbon: Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Panel List.
Toolbar: Insert Component
Menu: Components ➤ Insert Component (Panel List)
Command entry: AECOMPONENTPNL
Specifies to export the data for the active drawing
or the entire active project.
Extract component list for
Creates a comma-delimited file of the panel compon-
ent data. The extracted file name is the same as the
Save list to external file
project by default (project_name.WD4). You can
display this data in spreadsheet format (open it in
comma-delimited "CSV" format), edit, and then save.
Uses a previous project's panel component list to
create a spreadsheet listing. After the initial extrac-
tion, a list of panel components displays for selection.
Browse
Extracts only the information for components with
specific installation values. Once you pick Named
Installation Codes to extract
Installations, you can type the installation code in
the box or click List: Drawing or List: Project to select
from a list of used installation codes.
Extracts only the information for components with
specific location values. Once you pick Named Loca-
Location Codes to extract
tion, you can type the location code in the box or
click List: Drawing or List: Project to select from a list
of used location codes.
Panel components
This presents a list of all panel components extracted from the project's panel
layout drawings. As you pick an item from the pick list, the appropriate
Insert from panel lists | 791