2011

Insert components or terminals from panel lists
After the schematic component is selected and inserted in the drawing, all
panel-related information is copied to the schematic. Use the Insert/Edit
Component dialog box to make any additional changes to the new schematic
component.
1 Click Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Panel List.
or to insert terminals
Click Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Terminal (Panel List).
2 Specify whether to extract the panel component/terminal list for the
active drawing or the active project.
3 Specify any installation or location codes to extract.
4 Click OK.
5 If you are extracting for the entire project, select which drawing files to
process, and click OK.
6 On the Panel Components (or Panel Terminals) dialog box, select from
the list of panel components/terminals to insert the schematic symbol
on the schematic drawing.
To modify the pick list so you can easily find the component or terminal
to select, click Sort List, Display, or Mark Existing.
7 Click Insert.
8 On the Insert dialog box, select which block name to insert from the list.
If you want to insert an alternative block that is not in the list, click Icon
Menu to select a component from the icon menu or click Copy
Component to insert a component 'just like' another existing component.
9 Click OK.
10 Select the insertion point on the drawing.
11 Make any changes to the inserted component in the Insert/Edit
Component dialog box and click OK.
Panel layout list -> schematic components insert
790 | Chapter 10 Component Tools