2011

Insert
Finds and inserts a schematic component for the highlighted equipment list
component. The query of the schematic_lookup.mdb file returns one or more
block names based on data that appears in the pick list. The results are
displayed in the Insert dialog box along with a short description of each choice.
Pick File
Picks a file for the insert. Select an existing AutoCAD Electrical extracted
equipment list component list file or extract a fresh copy of panel component
data from the current project's database.
Insert
This dialog box displays the result of a query on the schematic_lookup.mdb
file. Select the appropriate block to insert from the list and click OK. The
selected schematic component is then annotated with the panel footprint or
equipment list data and inserted into the drawing. You can also select one of
the methods below to insert an alternative symbol.
Click Insert on the Panel terminals, Panel components, or Schematic
equipment list in dialog boxes.
Displays the icon menu from which you can select the schematic
component to insert. This is different than the schematic symbols
Icon Menu
in the list and should not be considered another way to select
the same components.
Copies a "just like" component and annotates it with the panel
data.
Copy Component
Insert from panel lists
Let your project set of panel layout drawings help drive the schematic wiring
diagrams. AutoCAD Electrical finds a match for the panel footprint in the
schematic lookup database on page 780 to determine the correct schematic
symbol to insert.
If a copy of the panel data is not in memory, then AutoCAD Electrical prompts
you to select which panel data you want to extract. Make your selection in
the dialog box and click OK. A list of all panel footprints is extracted. Select
from the panel list and place the schematic symbol on the wiring diagram.
Insert from panel lists | 789