2011

Table Of Contents
Catalog Data
Specifies the catalog part number information such as the manufacturer and
catalog number.
Count
Specifies the quantity number for the extra part number (blank=1). This value
gets inserted into the "SUBQTY" column of a BOM report.
Unit
Specifies the unit of measure, which can be displayed in the component list
report.
Parts Catalog Lookup
Lists the catalog database table that is to be referenced for the description
information for the given Manufacturer/Catalog/Assembly combination. For
each catalog entry, provide a name for the catalog look-up table. For the main
catalog entry, this information is provided on the symbol itself but may not
be there for these catalog entries. Select List to pick from a list of tables that
are contained in your catalog database file or Misc to use the MISC_CAT table.
Catalog Lookup
Checks for and displays catalog table information in the Parts Catalog dialog
box for the selected component type.
Catalog Check
Quickly performs a Bill of Material check and displays the result.
Item Number
Assign an item number to the catalog number.
If checked, marks an item number as fixed. If you
run
Resequence Item Numbers on page 1602 later on,
fixed item numbers do not change.
fixed
NOTE The fixed check box is available only when
assigning the catalog to panel components.
Finds the assigned manufacturer, catalog, assembly
code combination on components on the active
Drawing: Find
drawing. If a match is found, the item number is
754 | Chapter 10 Component Tools