2011

Table Of Contents
Click Setup to edit the component cross-reference settings
manually.
A pin list database table is consulted when a part number
is added or an existing part number is changed on a parent
Reference NO/ Reference NC
symbol. If a match on the Manufacturer, Catalog, and As-
sembly values of the part number in the database table is
found, the associated contact count and pin number in-
formation is retrieved and placed on the parent component.
Click NO/NC Setup to view or manually edit pin list data
values.
Installation Code
Changes the installation codes. You can search the current drawing or entire
project for installation codes. A quick read of all the current or selected drawing
files is done and a list of installation codes used so far is returned. Select from
the list to update the component with the installation code automatically.
Assign short installation codes to components like "PNL" and "FIELD" so you
can create installation-specific BOM and component lists later.
Location Code
Changes the location codes. You can search the current drawing or entire
project for location codes. A quick read of all the current or selected drawing
file is done and a list of location codes used so far is returned. Select from the
list to update the component with the location code automatically.
Assign short location codes to components like "PNL" and "FIELD" so you can
extract cable from/to reports and location-specific BOM reports later. (For
example, BOM for all field cables, BOM for all PNL cables.)
Show/Edit Miscellaneous
View or edit any attributes that are not predefined AutoCAD Electrical
attributes.
Pins
Assigns pin numbers to the pins that are physically located on the component.
For Connectors: Once a connector is inserted onto the block definition of the
drawing file, you can edit the connector pins found inside of the connector.
Click List to display the Connector Pin Numbers in Use dialog box where you
can edit the pin numbers and descriptions.
Insert schematic components | 747