2011

Table Of Contents
Views: Changes the view display for the Symbol Preview
window and Recently Used window. The current view option
is indicated with a check mark. Options include: Icon with
text, Icon only or List view.
The tree structure is created by reading the icon menu file (.dat).
The tree structure is based on the arrangement order of submenus
defined in the .dat file.
Menu
Displays the symbol and submenu icons corresponding to the
menu or the submenu selected in the Menu tree structure.
Symbol Preview window
Clicking on the icon performs one of the following functions
based on the icon properties as defined by the .dat file:
Inserts the symbol or circuit onto the drawing
Executes a command
Displays a submenu
NOTE When you move the cursor over an icon, the icon name
and block/circuit/command name display as tooltip information.
Displays the last components inserted during the current editing
session; the most recently used icon displays in the top. This list
Recently Used
follows the view options setting in the symbol preview window
(icon only, icon with text or list view). The total number of icons
displayed depends on the value specified in the Display edit box.
Specifies the number of icons to display in the Recently Used list
box. Enter integer numbers only; the default value is 10.
Display
Inserts the icon using a vertical or horizontal orientation. This
value is opposite the default ladder rung orientation for the
drawing.
Vertical/Horizontal
Turns off the Insert/Edit Component dialog box when inserting
symbols onto the drawing. To add component detail later, click
the Edit Component tool, and select the component to edit.
No edit dialog
Inserts the component, untagged (that is, without assigning a
unique Component Tag). The untagged value that displays is the
No tag
TAG1/TAG2 default value for the component. To add component
Use circuitry | 731